Chimiver Ecostar 2K Polyurethane Floor Lacquer
- A proper heavy duty water based floor lacquer from Chimiver
- Suitable for sealing high traffic wood floors,furniture, frames
- It can be used with or without a hardener to increase protection
- Non yellowing, water based, fume free, high traffic, very thick
- It will not change the color of the wood, slight glazer, durable
- Estimated coverage area : 14 sq meters per 1L (it will vary)
- Compatible with all wood stains and solvent/water based primers
- Highly popular with the professional floor refinishing industry
- Very well priced, very easy to use, highly cost effective sealer
Chimiver Ecostar 2K Polyurethane Floor Lacquer – Why Epsilon
Most of Chimivers`s water based floor lacquers are non glazers. Basically the lacquer will fully penetrate the wood surface without creating a glaze on the wood. But the new Chimiver Ecostar 2K Polyurethane Floor Lacquer is a bit different. This product is the ideal water based floor lacquer for floor sanding and floor refinishing projects where the floor has to be glazed. The new Chimiver Ecostar 2K Polyurethane Floor Lacquer looks elegant, it protects the wood for up to 10 years and it can be easily cleaned and maintained with flat mops. If you own or manage a floor sanding company, you need to check out the new Carver Epsilon Water Based Floor Lacquer. This is a profit generating product. Even better, the product is an anti-slip sealer.
Chimiver Ecostar 2K Polyurethane Floor Lacquer – Where to use it
A high quality water based floor lacquer compatible with all medium to high traffic wood floors. It can also be used to seal wood furniture, wood frames, wood doors and other items manufactured from wood. Use the new Chimiver Ecostar 2K Polyurethane Floor Lacquer to seal indoor wood surfaces only. It can be applied over water based & solvent based wood primers, over oil based and water based wood stains or directly on the wood. To be applied in a two coat system to achieve full protection. Use the amazing Chimiver Ecostar 2K Polyurethane Floor Lacquer to seal residential wood floors, retail wood floors, commercial wood floors, art gallery wood floors, show rooms, etc. Easy to use, quick to apply and ready for high traffic within a few hours.
Chimiver Ecostar 2K Polyurethane Floor Lacquer – How to use
If you are planning to maintain the natural look of the wood, you will need to prepare the surface very well. All pre-existing finishes will require full removal and the surface has to be dust free & dry. If you are not staining the wood surface, then you can use the new Chimiver Ecostar 2K Polyurethane Floor Lacquer without a hardener. Two coat systems with about 2 hours break between the coats is more than enough. Remember to sand the wood between coats. If you are using an oil based stain, then you will have to mix up the Chimiver Ecostar 2K Polyurethane Floor Lacquer with the hardener. Apply the stain, allow 2-3 hours to dry, then apply 2 coats of the floor lacquer. You can apply as many coats as you wish but the floor will get glossier and glossier with each coat of lacquer.
This is one of the most widely used and highly recommended water based floor lacquers from Chimiver. To achieve professional results and to maximize its potential, make sure that the surface is prepared well and the whole application process is respected. For a natural finish apply maximum 2 coats of floor lacquer. If you are looking for a good sheen on your wooden floors, apply 3+ coats.
Chimiver Ecostar 2K Polyurethane Floor Lacquer